Vandy Vape Pulse X BF Kit | Preview

The Pulse Kit just got the ‘X’ factor.

3 min read

Vandy Vape Pulse X BF Kit Preview

Vandy Vape Pulse X BF Kit Intro

Vandy Vape and Tony B from the Vapor Trail Channel have been collaborating again, and this time they have come up with the Pulse X BF Squonk Kit. It features the familiar Pulse design with colorful translucent or G10 magnetic panels, which come in seven colors and are easy to replace.

Vandy Vape Pulse X BF Kit

What Is it?

Vandy Vape Pulse X BF Squonk Kit is powered by a single 18650/20700/21700 battery and supports 90W max output power. It comes with translucent colored panels with magnetic design, which are easy to replace.

The Pulse X has a rapid firing and precise output control with the Vandy Chip. There should be no leakage with the squonk feed and bottom juice return with a large capacity silicon squonk bottle convenient for the bottom feeding.

Included in the kit is the new Vandy Vape Pulse X BF RDA which has the Tony B “X” designed post deck which supports vertical & horizontal builds with an adjustable airflow system supporting both top filling from the drip tip and bottom filling as a squonk. Vape juice will directly go to the top of the coils saturating wicks from the top, ensuring coils are always wet and ready to go.

Vandy Vape Pulse X BF Kit

Who is it for?

Vapers that were considering getting the original Pulse 80W, but didn’t quite bite the bullet. Also those wanting a 21700 squonker paired with a dual coil RDA that’s capable of horizontal and vertical coils.

You might also like

Vandy Vape Pulse X BF Kit

Our Vibe

The Vandy Vape Pulse BF 80w has been one of our best vapes for a while now, and you would be hard pushed to find a better squonk mod at its price point. The only real complaint we have seen thrown around in the forums was that it never housed a 21700 – which was never part of the original design as it wasn’t really mainstream during the development cycle. The Pulse X, on the other hand, is 90w and needs the extra power.

The simple translucent panels are available similar to the original Vandy Vape Pulse, but the inclusion of red or black G10 panels are a nice touch. G10 is a tough fiberglass composite used to make handles for knives, grips for firearms and other tools.

It’s a shame Vandy Vape didn’t just make some G10 panels for the 80w with a slight indent to compensate for the mm needed for a 21700.

If you waited the extra three months through the VooPoo drama for the Pulse BF 80w, don’t get your knickers in a twist. Yes, the Pulse X supports a larger battery, has some stronger panels and an RDA. But it’s only 10 watts and a tiny bit better battery life.

I think the fascinating part of the updated kit is going to be the Pulse X RDA, and I can’t wait to see how it stacks up to the competition.

It’s also going to be available separately so those that do have the original Pulse 80W mod can create their own pairing.

Where can you get it?

use vapingvibe to get an extra 10% off

Vandy Vape Pulse X BF Kit

Specs & Features

Pulse X BF Mod:

  • Size: 82*56*28mm
  • Power range: 5-90W
  • Standby current: <30uA
  • Output voltage: 0.5-8.5V
  • Resistance range: 0.05-3ohm(VW)/0.05-1.5ohm(TC)
  • Temperature range: 200-600℉/100-315℃
  • Color A: G10 Black, G10 Red
  • Color B: Frosted Red, Frosted Green, Frosted Cyan, Frosted Amber, Frosted Black

Pulse X BF RDA:

  • Length: 25.5mm
  • Diameter: 24mm
  • Capacity: 2ml
  • Material: Stainless Steel

Kit Contents

  • 1 x Vandy Vape Pulse X BF Kit
  • 1 x 8ml Squonk Bottle
  • 1 x QC USB Cable
  • 1 x Instructional Manual
  • 1 x 18650 Battery Adaptor
  • 1 x 30ml Silicone Refilling Bottle(optional)
  • 1 x Accessories Package
  • 1 x Trimming Device
  • 1 x Coil Lead Guide
  • 1 x 2 Coils